Mono M80-VAD-BLK VERTIGO Acoustic Guitar Case

Features

GRAB AND GO

A slick feature that you will come to love. The Vertigo does not open like a traditional guitar case. Its design allows you to quickly unzip the case and pull your guitar out from the top. This is enabled by a hidden diagonal hinge on the front panel of the case. Once unzipped, the case naturally opens out and to the right. No need to lay your guitar case down on the floor. Take a stand.

LOCK AND LOAD

The Vertigo features a fully redesigned Headlock neck suspension system. No strapping, buckling, or belting required. No extra steps. Just throw your guitar in and the neck finds a natural resting point in the base of the Headlock. Then zip the case up and the top section of the Headlock automatically clamps down over your guitar, holding it firmly in place. Your headstock is now fully protected against backward drops and side-to-side impact. Lightning fast!

DROP-PROOF

Another first of its kind, The Boot takes guitar protection to a new level. Using manufacturing technologies from the footwear industry, the Vertigo bounces off of concrete like a pair of cross trainers. With its custom molded rubber outsole and EVA insole, The Boot® also protects strap pins* from those nasty vertical drops. Despite its serious design, the Vertigo just wants to have fun.

STRAP PIN PROTECTION

The insole/outsole combination of The Boot design keeps the strap pin* off the ground even during hard vertical drops.

Integral ABS panels deliver hardcase protection at a fraction of the weight. (MONO cases weigh in at about 75% less than their hardcase counterparts.) The reinforced outer shell of the Vertigo absorbs and deflects hard impact away from the vulnerable areas of the guitar.

*Offset guitar strap pins may receive less protection from The Boot

SMART STORAGE

Most MONO cases come equipped with the triple D-ring attachments required for the optional Classic Tick Accessory Case, the modular tool case designed to extend the storage capacity of your guitar case. The Classic Tick Accessory Case seamlessly and securely attaches to the case as shown. Some older cases may not be Tick-ready - please contact support if you have questions about the Tick-compatibility of your MONO case.

PLUG AND PLAY

Everything in its place. Specialized storage compartments put your gear right where you need it. Deep gussets make sure your small items stay put.

BUILT TO LAST

WEAR IT OUT

MONO cases are built to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes. Outside, the water-resistant Sharkskin™ shell keeps you on the move, rain or shine. 100% animal free.

HARD-WEARING SOLE & RIVETED HANDLE

Rock solid, industrial webbing handles come standard on MONO cases. Bar-tack stitching and steel rivets reinforce for strength, while high grade webbing provides a super comfortable grip.

The Vertigo features a molded rubber sole and piping made of Hypalon - the same industrial rubber used to create inflatable military rafts. This sole simply does not wear out.

DIMENSIONS & FITTING

LIKE A GLOVE

These measurements represent the inner capacity of the case. If you are unsure about the fit for your guitar, make sure it does not exceed any of the maximum dimensions shown just to be safe. This case is designed to fit all standard body acoustic dreadnought guitars including Yamaha, and others. Also suitable for most archtops. 

Specs

• Internal Dimensions: 42" x 16" x 4.5" (106.7cm x 38.1cm x 11.4cm)
• External Dimensions: 46" x 18.3" x 8.2" (116.8cm x 46.5cm x 20.8cm)
• External Pocket Dimensions: 9" (Short) / 17" (Tall) x 17" x 1.5" (22.9cm / 43.2cm x 43.2cm x 3.8cm)
• Weight: 120oz (3.3kg)

Questions & Answers